- Prima pagină
- Produse
- Feronerie arhitecturală
- Accesorii pentru uși
- Garnitură falț,DS 7527, DS 7552, DS 7553, Deventer

Garnitură falț,DS 7527, DS 7552, DS 7553, Deventer


- Culorile și materialul pentru garnitura de falț
- Black
- Dark brown
- Brown
- Beige
- white
- Transparent
- Alkyd resin varnishes and lacquers
- Polyurethane lacquers (DD lacquers)
- 2-component epoxy resin lacquers
- Acid hardening lacquers, where the PVC resistance is
- specified by the manufacturer
- Chemically cross-linked enamel
- Alkyd resin varnishes and lacquers
- Polyurethane lacquers (DD lacquers)
- 2-component epoxy resin lacquers
- Acid hardening lacquers
- Chemically cross-linked enamel
- Nitrocellulose lacquers
- Solvent-based or water-based acrylic varnishes and lacquers
- Nitrocellulose lacquers
- Solvent-based or water
- thinnable acrylic varnishes and lacquers
- PVC lacquers
- Good physical properties
- Temperature range from –20 to +60 °C
- Resistant to aging, weathering and ozone
- Good physical and thermal properties
- Excellent resilience
- Comfortable closing pressure
- High tolerance compensation
- Temperature range from -40 to +180 °C
- Resistant to aging, weathering and ozone
- Very good physical and thermal properties
- Excellent resilience
- Soft and smooth closing properties
- High tolerance compensation with warped door panel
- Temperature range from -60 to +250 °C
- Resistant to aging, weathering and ozone
- For interior doors
- For interior and front doors
- For soundproof and smoke control doors
- For interior and front doors
- For soundproof and smoke control doors
- For sauna doors
- Tipuri de instalare a garniturilor de falț
Rebate seal colours and nature of material
Standard colours
Other colours available on request.
paint compatibility
Sealing profiles which are painted over or used for renovation purposes must always be tested for their compatibility with the lacquer.
Irrespective of the specifications for paint compatibility, testing should always be carried out.
When complying with the stipulated drying cycles, the compatibility is given for following coating systems:
Sealing profiles made from modified elastic polymer (PVC) | Sealing profiles made from thermoplastic elastomer (TPE) or cross-linked silicon |
Not suitable for coating are following: | |
– |
Quality
Modified elastic polymer (PVC) | Thermoplastic elastomer (TPE) | cross-linked silicon |
Features | ||
Areas of application | ||
Installation types
Rebate seals for room doors are mounted in the groove of the frame or door.
Depending on the version, the bottom part of the seal is inserted directly into the groove (fig. 1) or the seal must be fitted with a carrier (fig. 2). Rebate seals for front doors are fitted in the door (fig. 3).
![]() | ![]() | ![]() |
Fig. 1 | Fig. 2 | Fig. 3 |
Filtru
Complete your selection

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |

Garnitură falț,DS 7553


Notă: Imaginea poate arăta un produs similar
Indicaţie
Selectaţi un articol prin intermediul caracteristicilor sau al tabelului de articole, pentru a-l adăuga în coşul de cumpărături.