Glisiere pe bile,extragere totală, Accuride 3832, Sarcină până la 45 kg, oțel, montare laterală

  • Informaţii
  • Runner type

    The type of runner is determined by the design of the running elements, independently of the mounting method.


    Plastic guide railsact as gliding surfaces that support the weight of drawers and their contents.


    Roller guided drawer runnersThe running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and soft rollers for silent moving.


    Ball guided drawer runnersSteel or plastic balls in ball cages are used as the running elements.

    Groove mounted runners, are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws

    Roller bearing guided concealed dynamic runnersRollers are running elements in running gears.


    Mounting option

    Internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.


    Load bearing capacity

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.


    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all mounting holes are screw-connected using suitable fastening material.


    The load bearing capacity of ball bearing runners that are suitable for side and base mounting is reduced to about 25% if the ball bearing runners are installed horizontally.


    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options


    On shelves


    Side mounted

    Base mounted I

    Base mounted II



    On drawers


    Groove mounted

    Side mounted

    Base mounted�




    On cabinets


    Side mounted


    Base panel mounting

  • Instrucţiuni disponibile.
    Selectaţi un articol.
  • Sunt disponibile documente tehnice.
    Selectaţi un articol.


Complete your selection



Cantitatea solicitată este în stoc.
Stoc disponibil limitat.
Articolul nu mai este disponibil.

Doriţi o livrare parţială de articole disponibile imediat, puteți selecta acest lucru în finalizarea comenzii.

NONE Min. 1

422.41.315 glisiera bile,otel.negru,45kg,150mm

lungime de montaj: 150 mm, negru zincat

422.41.320 glisiera bile,otel.negru,45kg,200mm

lungime de montaj: 200 mm, negru zincat

422.41.325 Soft-Roller 45 KTS black 250mm

lungime de montaj: 250 mm, negru zincat

422.41.330 glisiera bile,otel.negru,45kg,300mm

lungime de montaj: 300 mm, negru zincat

Detalii produse
Accuride3832cu blocaj pentru menţinere în poziţie închisă

Materie primă



Zincat negru sau zincat


cu blocaj pentru menţinere în poziţie închisă

Cu ajustare pe înălţime

±1,6 mm pentru reglarea frontului de sertar


de la –20 la +80°C

Lăţime max. sertar

Lăţimea interioară a corpului – 25,4 mm
Afişare mai multe informaţii
Componente produs

Notă pentru comandă

La cerere, este disponibil și în negru zincat sau acoperit cu alb pentru o comandă de minim 10 perechi.

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email:
24 februarie 2021

Glisiere pe bile,extragere totală, Accuride 3832, Sarcină până la 45 kg, oțel, montare laterală

Notă: Imaginea poate arăta un produs similar