- Prima pagină
- Produse
- Soluții pentru mobilier, bucătării și spații de locuit
- Sisteme pentru mese, picioare și rotile pentru mobilier
- Feronerie pentru mese
- Glisiere pe bile,pentru 1-3 plăci de extensie, pentru mese cu și fără cadru

Glisiere pe bile,pentru 1-3 plăci de extensie, pentru mese cu și fără cadru



- Mese cu sau fără cadru
- Piese pentru mese extensibile cu cadru - construcție
- One-piece table base
- Separate table tops and extension leaves with table top connecting fittings and sleeves
- Extension leaves can be fitted to the table frame with a folding fitting.
- Pull out tables with closed frame can be equipped with a separated, hinged middle section (folding fitting) instead of an extension leaf.The folding fitting is required in addition to the pull out table fitting and must be ordered separately.
- Installation length L of pull out table fitting = approx. length of frame/base or approx. 2/3 of table Ø or table length without extension leaves
- Separate extension leaf (separate storage)
- Separate extension leaf (integrated in table)
- Folding fitting (integrated in table)
- Open table frame
- Folding fitting (integrated in table)
- Folding fitting (integrated in table, "drawer function")
- Piese pentru mese extensibile pentru mese fără cadru - construcție
- Multi-piece table base, each fixed to one half of the table top.
- Surrounding panel beneath table top stabilises the pull out table.
- If the table legs are mounted inwards (with balance point on table top half), the pull out table fitting can be used without a central rod.
- If table legs are mounted outwards, always select pull out table fitting with central rod.
- Installation length L of pull out table fitting = approx. length of frame/base or approx. 2/3 of table Ø or table length without extension leaves
- A = width of extension leaf
- L = installation length of pull out table fitting
- B = total extension length of pull out table fitting
- E = opening for extension leaf
- Separate extension leaf (separate storage)
- Open table frame
- Separate extension leaf (separate storage)
Table with or without frame
Table bases with and without frames are constructed and function in different ways.
Table with frame = one-piece table base | Table without frame = multi-piece table base | ||
![]() | The separable table tops are pushed apart. The table base remains unchanged. | ![]() | The separable table bases with fixed table top are pushed apart. |
![]() | ![]() |
Following applies for both tables with frame and without frame:
Extension leaf
Min. width 400 mm, Standard 500 mm, Comfort 600 mm, one extension leaf provides additional seating for 2 people.
Synchronous
Only one table side must be pulled out. The opposite side of the table is then extended automatically.
Asynchronous
Both table sides must be pulled out separately.
Without locking mechanism
For locking the pull out table fitting in extended position additional fittings are required (table top swivel bolts, locking hooks or spring clips).
With locking mechanism
The locking mechanism is integrated in the pull out table fitting. No further fittings are required.
Pull out table fittings for tables with frame
Construction
Notes on construction
Note on choice of pull out table fitting
![]() |
ⓐ= width of extension leaf ⓛ= installation length of pull out table fitting ⓑ= total extension length of pull out table fitting ⓔ= opening for extension leaf |
Please note:
If the installation length L is less than approx. length of frame/base or table Ø, this may lead to malfunction or sagging of the table top.
Types of tables with frame
open table frame | Closedtable frame | Separate extension leaf on end side | front extension | Front extension |
![]() Separate extension leaf | ![]() Folding fitting | ![]() | ![]() | ![]() |
Note: Folding fitting must be ordered separately in addition to the pull out table fitting.
Pull out table fittings for tables without frame
Construction
Notes on construction
![]() | |||
![]() | (1) central rod |
Note on choice of pull out table fitting
![]() | |
View of table from below, without extension leaf ![]() | |
ⓐ Installation length of pull out table fitting is approx. length of frame |
Please note: If the installation length L is less than approx. length of frame/base or 2/3 of table Ø, this may lead to malfunction or sagging of the table top.
Types of tables without frame
open table frame | Front extension |
![]() | ![]() |
Filtru
Complete your selection

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |

Glisiere pe bile,pentru 1-3 plăci de extensie, pentru mese cu și fără cadru
Picior de sprijinire furnizat la locul instalării



Notă: Imaginea poate arăta un produs similar
Indicaţie
Selectaţi un articol prin intermediul caracteristicilor sau al tabelului de articole, pentru a-l adăuga în coşul de cumpărături.